Operation Manual – LoginH3C S3100 Series Ethernet Switches Chapter 2 Logging in through the Console Port2-14Operation Command DescriptionConfigure to authenticateusers locally or remotelyauthentication-mode scheme[ command-authorization ]RequiredThe specified AAA schemedetermines whether toauthenticate users locally orremotely.By default, users logging inthrough the Console port (AUXuser interface) are notauthenticated.Set thebaud rate speed speed-valueOptionalThe default baud rate of theAUX port (also the Consoleport) is 9,600 bps.Set thecheck modeparity { even | none |odd }OptionalBy default, the check mode of aConsole port is set to none,that is, no check bit.Set the stopbits stopbits { 1 | 1.5 | 2 }OptionalThe default stop bits of aConsole port is 1.ConfiguretheConsoleportSet the databits databits { 7 | 8 }OptionalThe default data bits of aConsole port is 8.Configure the commandlevel available to userslogging into the userinterfaceuser privilege levellevelOptionalBy default, commands of level 3are available to users logginginto the AUX user interface.Make terminal servicesavailable to the userinterfaceshellOptionalBy default, terminal servicesare available in all userinterfaces.Set the maximumnumber of lines thescreen can containscreen-lengthscreen-lengthOptionalBy default, the screen cancontain up to 24 lines.You can use the screen-length0 command to disable thefunction to display informationin pages.Set history commandbuffer sizehistory-commandmax-size valueOptionalThe default history commandbuffer size is 10. That is, ahistory command buffer canstore up to 10 commands bydefault.
