Operation Manual – MAC Address Table ManagementH3C S3100 Series Ethernet SwitchesChapter 1 MAC Address TableManagement1-10Follow these steps to configure the start port MAC address:To do… Use the command… RemarksEnter system view system-view —Configure the start portMAC addressport-macstart-mac-addressRequiredNo start port MACaddress is configured bydefault.Note:The start port MAC address must be a valid unicast address.With the port MAC address configuration, the switch uses the MAC address of a port asthe source MAC address when sending the following Layer 2 PDUs out of the port:z LACPz STPz NDP/NTDPz GVRPz DLDPPort MAC address configuration does not affect service packet forwarding.1.3 Displaying MAC Address Table InformationTo do… Use the command… RemarksDisplay information aboutthe MAC address tabledisplay mac-address[ display-option ]Display the aging time ofthe dynamic MACaddress entries in theMAC address tabledisplay mac-addressaging-timeDisplay the configuredstart port MAC address display port-macAvailable in any view
