Operation Manual – 802.1x-System GuardH3C S3100 Series Ethernet Switches Chapter 1 802.1x Configuration1-171.3.3 Timer and Maximum User Number ConfigurationTable 1-2 Configure 802.1x timers and the maximum number of usersOperation Command RemarksEnter system view system-view —Insystemviewdot1x max-useruser-number [ interfaceinterface-list ]interface interface-typeinterface-numberdot1x max-useruser-numberSet themaximumnumberofconcurrent on-lineusers forspecifiedportsIn portviewquitOptionalBy default, a port canaccommodate up to 256 users ata time.Set the maximumretry times to sendrequest packetsdot1x retrymax-retry-valueOptionalBy default, the maximum retrytimes to send a request packet is2. That is, the authenticatorsystem sends a request packet toa supplicant system for up to twotimes by default.Set 802.1x timersdot1x timer{ handshake-periodhandshake-period-value| quiet-periodquiet-period-value |server-timeoutserver-timeout-value |supp-timeoutsupp-timeout-value |tx-period tx-period-value| ver-periodver-period-value }OptionalThe settings of 802.1x timers areas follows.z handshake-period-value: 15secondsz quiet-period-value: 60secondsz server-timeout-value: 100secondsz supp-timeout-value: 30secondsz tx-period-value: 30 secondsz ver-period-value: 30 secondsEnable thequiet-period timer dot1x quiet-periodOptionalBy default, the quiet-period timeris disabled.
