Operation Manual – ARPH3C S3100 Series Ethernet Switches Chapter 1 ARP Configuration1-3Table 1-2 Description on the values of the hardware type fieldValue Description1 Ethernet2 Experimental Ethernet3 X.254 Proteon ProNET (Token Ring)5 Chaos6 IEEE802.X7 ARC network1.1.3 ARP TableIn an Ethernet, the MAC addresses of two hosts must be available for the two hosts tocommunicate with each other. Each host in an Ethernet maintains an ARP table, wherethe latest used IP address-to-MAC address mapping entries are stored. S3100 seriesEthernet switches provide the display arp command to display the information aboutARP mapping entries.ARP entries in an S3100 series Ethernet switch can either be static entries or dynamicentries, as described in Table 1-3.Table 1-3 ARP entriesARP entry Generation Method Maintenance ModeStatic ARP entry Manually configured Manual maintenanceDynamic ARP entry Dynamically generatedARP entries of this type age withtime. The aging period is set bythe ARP aging timer.