Operation Manual – SSHH3C S5600 Series Ethernet Switches Chapter 1 SSH Configuration1-14Table 1-11 Follow these steps to export the RSA public key:To do... Use the command... RemarksEnter system view system-view —Display the RSA key on thescreen in a specified format orexport it to a specified filepublic-key local exportrsa { openssh | ssh1 |ssh2 } [ filename ]RequiredTable 1-12 Follow these steps to export the DSA public key:To do... Use the command... RemarksEnter system view system-view —Display the DSA key on thescreen in a specified format orexport it to a specified filepublic-key local export dsa{ openssh | ssh2 }[ filename ]RequiredNote:The DSA public key format can be SSH2 and OpenSSH, while the RSA public keyformat can be SSH1, SSH2 and OpenSSH.1.4 Configuring the SSH ClientThe configurations required on the SSH client are related to the authentication modethat the SSH server uses. In addition, if an SSH client does not support first-timeauthentication, you need to configure the public key of the server on the client, so thatthe client can authenticate the server.1.4.1 SSH Client Configuration Task ListTable 1-13 Complete the following tasks to configure the SSH client:SSH client configuration taskScenario For a client runningSSH client softwareFor a client assumed by anSSH2-capable switchThe authenticationmode is passwordConfiguring an SSHClient that Runs SSHClient SoftwareConfiguring an SSH ClientAssumed by an SSH2-CapableSwitchThe authenticationmode is publickeyConfiguring an SSHClient that Runs SSHClient SoftwareConfiguring an SSH ClientAssumed by an SSH2-CapableSwitch
