Operation Manual – HWPingH3C S5600 Series Ethernet Switches Chapter 1 HWPing Configuration1-37III. Configuration procedurez Configure DNS Server:Use Windows 2003 Server as the DNS server. For DNS server configuration, refer tothe related instruction on Windows 2003 Server configuration.z Configure HWPing Client (Switch A)# Enable the HWPing client. system-view[Sysname] hwping-agent enable# Create a HWPing test group, setting the administrator name to administrator andtest tag to dns.[Sysname] hwping administrator dns# Configure the test type as dns.[Sysname-hwping-administrator-dns] test-type dns# Configure the IP address of the DNS server as 10.2.2.2.[Sysname-hwping-administrator-dns] dns-server 10.2.2.2# Configure to resolve the domain name www.test.com.[Sysname-hwping-administrator-dns] dns resolve-target www.test.com# Configure to make 10 probes per test.[Sysname-hwping-administrator-dns] count 10# Set the probe timeout time to 5 seconds.[Sysname-hwping-administrator-dns] timeout 5# Start the test.[Sysname-hwping-administrator-dns] test-enable# Display test results.[Sysname-hwping-administrator-dns] display hwping results administrator dnsHWPing entry(admin administrator, tag dns) test result:Destination ip address:10.2.2.2Send operation times: 10 Receive response times: 10Min/Max/Average Round Trip Time: 6/10/8Square-Sum of Round Trip Time: 756Last complete test time: 2006-11-28 11:50:40.9Extend result:SD Maximal delay: 0 DS Maximal delay: 0Packet lost in test: 0%Disconnect operation number: 0 Operation timeout number: 0System busy operation number: 0 Connection fail number: 0Operation sequence errors: 0 Drop operation number: 0
