Operation Manual – File System ManagementH3C S5600 Series Ethernet Switches Chapter 1 File System Management Configuration1-4To do… Use the command… RemarksEnter system view system-view —Execute the specifiedbatch file execute filename OptionalAvailable in system viewCaution:z For deleted files whose names are the same, only the latest deleted file is kept in therecycle bin and can be restored.z The files which are deleted by the delete command without the /unreservedkeyword are actually moved to the recycle bin and thus still take storage space. Youcan clear the recycle bin by using the reset recycle-bin command.z Use the update fabric command after all traffic flows are stopped.z The dir /all command displays the files in the recycle bin in square brackets.z If the configuration files are deleted, the switch adopts the null configuration when itstarts up next time.1.1.5 Flash Memory OperationsFollow these steps to perform Flash memory operations:To do… Use the command… RemarksFormat the Flash memory format device RequiredAvailable in user viewRestore space on theFlash memory fixdisk device RequiredAvailable in user viewCaution:The format operation leads to the loss of all files, including the configuration files, on theFlash memory and is irretrievable.1.1.6 Prompt Mode ConfigurationYou can set the prompt mode of the current file system to alert or quiet. In alert mode,the file system will give a prompt for confirmation if you execute a command which may
