Operation Manual – DHCPH3C S5600 Series Ethernet Switches Chapter 6 DHCP/BOOTP Client Configuration6-36.3.1 DHCP Client Configuration ExampleI. Network requirementsUsing DHCP, VLAN-interface 1 of Switch B is connected to the LAN to obtain an IPaddress from the DHCP server.II. Network diagramSee Figure 2-1.III. Configuration procedureThe following describes only the configuration on Switch B serving as a DHCP client.# Configure VLAN-interface 1 to dynamically obtain an IP address by using DHCP. system-view[SwitchB] interface Vlan-interface 1[SwitchB-Vlan-interface1] ip address dhcp-alloc6.3.2 BOOTP Client Configuration ExampleI. Network requirementSwitch B’s port belonging to VLAN1 is connected to the LAN. VLAN-interface 1 obtainsan IP address from the DHCP server by using BOOTP.II. Network diagramSee Figure 2-1.III. Configuration procedureThe following describes only the configuration on Switch B serving as a client.# Configure VLAN-interface 1 to dynamically obtain an IP address from the DHCPserver. system-view[SwitchB] interface vlan-interface 1[SwitchB-Vlan-interface1] ip address bootp-alloc6.4 Displaying DHCP/BOOTP Client ConfigurationTo do… Use the command… RemarksDisplay related informationon a DHCP client display dhcp client [ verbose ]Display related informationon a BOOTP clientdisplay bootp client [ interfaceVlan-interface vlan-id ]OptionalAvailable inany view
