Operation Manual – IPv6 ManagementH3C S5600 Series Ethernet Switches Chapter 2 IPv6 Application Configuration2-65 packet(s) transmitted5 packet(s) received0.00% packet lossround-trip min/avg/max = 31/46/110 ms# On SWA, configure static routes to SWC, the Telnet Server, and the TFTP Server. system-view[SWA] ipv6 route-static 3002:: 64 3003::1[SWA] ipv6 route-static 3001:: 64 3003::1[SWA] quit# Trace the IPv6 route from SWA to SWC. tracert ipv6 3002::1traceroute to 3002::1 30 hops max,60 bytes packet1 3003::1 30 ms 0 ms 0 ms2 3002::1 10 ms 10 ms 0 ms# SWA downloads a file from TFTP server 3001::3. tftp ipv6 3001::3 get filetoget flash:/filegothere.File will be transferred in binary modeDownloading file from remote tftp server, please wait....TFTP: 13 bytes received in 1.243 second(s)File downloaded successfully.# SWA Connect to Telnet server 3001::2. telnet ipv6 3001::2Trying 3001::2...Press CTRL+K to abortConnected to 3001::2 ...Telnet Server>2.4 Troubleshooting IPv6 Application2.4.1 Unable to Ping a Remote DestinationI. SymptomUnable to ping a remote destination and return an error message.II. Solutionz Check that the IPv6 addresses are configured correctly.z Use the display ipv6 interface command to determine the interfaces of thesource and the destination and the link-layer protocol between them are up.
