Operation Manual – ClusterH3C S5600 Series Ethernet Switches Chapter 1 Cluster1-16To do… Use the command… RemarksEnter system view system-view —Enter cluster view cluster RequiredConfigure a shared FTPserver for the cluster ftp-server ip-addressOptionalBy default, themanagement device actsas the shared FTP server.Configure a shared TFTPserver for the cluster tftp-server ip-addressOptionalBy default, no sharedTFTP server isconfigured.Configure a sharedlogging host for the cluster logging-host ip-addressOptionalBy default, no sharedlogging host is configured.Configure a shared SNMPhost for the cluster snmp-host ip-addressOptionalBy default, no sharedSNMP host is configured.IX. Configuring the network management interface for a cluster1) Configuration prerequisitesz The cluster switches are properly connected;z The shared servers are properly connected to the management switch.2) Configuration procedureFollow these steps to configure the network management interface for a cluster:To do… Use the command… RemarksEnter system view system-view —Enter cluster view cluster RequiredConfigure the networkmanagement (NM)interface for the clusternm-interfaceVlan-interface vlan-idRequiredBy default, themanagement VLANinterface is used as theNM interface.1.2.2 Configuring Member DevicesI. Member device configuration task listComplete the following tasks to configure the member device:
