Operation Manual – Information CenterH3C S5600 Series Ethernet Switches Chapter 1 Information Center1-8VI. ModuleThe module field represents the name of the module that generates system information.You can enter the info-center source ? command in system view to view the modulelist. Refer to Table 1-3 for module name and description.Between “module” and “level” is a “/”.VII. Level (Severity)System information can be divided into eight levels based on its severity, from 1 to 8.Refer to Table 1-1 for definition and description of these severity levels. Note that thereis a forward slash “/” between the level (severity) and digest fields.VIII. DigestThe digest field is a string of up to 32 characters, outlining the system information.Note that there is a colon between the digest and content fields.For system information destined to the log host,z If the character string ends with (l), it indicates the log informationz If the character string ends with (t), it indicates the trap informationz If the character string ends with (d), it indicates the debugging informationIX. SourceThis field indicates the source of the information, such as the source IP address of thelog sender. This field is optional and is displayed only when the output destination is thelog host.X. ContextThis field provides the content of the system information.1.2 Information Center Configuration1.2.1 Information Center Configuration Task ListComplete the following tasks to configure information center:Task RemarksConfiguring Synchronous Information Output OptionalConfiguring to Display the Time Stamp with the UTC Time Zone OptionalSetting to Output System Information to the Console OptionalSetting to Output System Information to a Monitor Terminal OptionalSetting to Output System Information to a Log Host OptionalSetting to Output System Information to the Trap Buffer Optional
