Operation Manual – VRRPH3C S5600 Series Ethernet Switches Chapter 1 VRRP Configuration1-11IV. Configuring VRRP TrackingFollow these steps to configure VRRP tracking:To do… Use the command… RemarksEnter system view system-view —Enter VLAN interface view interface Vlan-interfacevlan-id —Configure a virtual routerIP addressvrrp vrid virtual-router-idvirtual-ip virtual-address RequiredEnable the interfacetracking functionvrrp vrid virtual-router-idtrack interfacevlan-interface vlan-id[ reduced value-reduced ]OptionalBy default, the VLANinterface prioritydecreases by 10.Return to system view quit —Enter Ethernet port view interface interface-typeinterface-number —Enable the port trackingfunctionvrrp vlan-interfacevlan-id vridvirtual-router-id track[ reduced value-reduced ]RequiredBy default, the port prioritydecreases by 10.Note:z The port to be tracked can be in the VLAN which the VLAN interface of the VRRPgroup belongs to.z Up to eight ports can be tracked simultaneously through the port tracking function.1.3 Displaying and Maintaining VRRPTo do… Use the command… RemarksDisplay VRRP statisticsinformationdisplay vrrp statistics [ interfacevlan-interface vlan-id [ vridvirtual-router-id ] ]Display VRRP stateinformationdisplay vrrp [ verbose ] [ interfacevlan-interface vlan-id [ vridvirtual-router-id ] ]Available in anyviewClear VRRP statisticsinformationreset vrrp statistics [ interfacevlan-interface vlan-id [ vridvirtual-router-id ] ]Available in userview
