Operation Manual – Routing ProtocolH3C S5600 Series Ethernet Switches Chapter 5 BGP Configuration5-375.8.3 Clearing BGP InformationTo do... Use the command... RemarksClear the route dampeninginformation and release thesuppressed routesreset bgp dampening[ network-address [ mask ] ]Clear the route flaps statisticsreset bgp flap-info[ regular-expressionas-regular-expression | as-path-aclacl-number | ip-address [ mask ] ]Available inuser view5.9 BGP Configuration Examples5.9.1 Configuring BGP Confederation AttributeI. Network requirementsBGP runs in a large AS of a company. As the number of IBGP peers increases rapidlyin the AS, more network resources for BGP communication are occupied. Thecustomer hopes to reduce IBGP peers to minimize the CPU and network resourcesconsumption by BGP without affecting device performance.Based on user requirements, configure a BGP confederation to achieve the goal.II. Network diagramFigure 5-14 shows the network diagram.Device Interface IP address ASSwitch A Vlan-int 10 172.68.10.1/24 100Switch B Vlan-int 10 172.68.10.2/24Switch C Vlan-int 10 172.68.10.3/24Vlan-int 20 172.68.1.1/24Vlan-int 30 156.10.1.1/24Switch D Vlan-int 20 172.68.1.2/24Switch E Vlan-int 30 156.10.1.2/24 200Figure 5-14 Network diagram for AS confederation configuration
