Operation Manual – Information CenterH3C S5600 Series Ethernet Switches Chapter 1 Information Center1-181.3 Displaying and Maintaining Information CenterTo do… Use the command… RemarksDisplay information on aninformation channeldisplay channel [ channel-number| channel-name ]Display the operationstatus of informationcenter, the configurationof information channels,the format of time stampand the information outputin case of fabricdisplay info-center [ unit unit-id ]Display the status of logbuffer and the informationrecorded in the log bufferdisplay logbuffer [ unit unit-id ][ level severity | size buffersize ]* [ |{ begin | exclude | include }regular-expression ]Display the summaryinformation recorded inthe log bufferdisplay logbuffer summary [ levelseverity ]Display the status of trapbuffer and the informationrecorded in the trap bufferdisplay trapbuffer [ unit unit-id ][ size buffersize ]Available in anyviewClear informationrecorded in the log buffer reset logbuffer [ unit unit-id ]Clear informationrecorded in the trap buffer reset trapbuffer [ unit unit-id ]Available in userview1.4 Information Center Configuration Examples1.4.1 Log Output to a UNIX Log HostI. Network requirementsThe switch sends the following log information to the Unix log host whose IP address is202.38.1.10: the log information of the two modules ARP and IP, with severity higherthan “informational”.II. Network diagramFigure 1-1 Network diagram for log output to a Unix log host
