Operation Manual – IPv6 ManagementH3C S5600 Series Ethernet Switches Chapter 1 IPv6 Configuration1-19To do… Use the command… RemarksConfigure the domainsuffix.dns domaindomain-nameRequiredBy default, no domainname suffix is configured,that is, the domain nameis resolved according tothe input information.Note:The dns resolve and dns domain commands are the same as those of IPv4 DNS. Fordetails about the commands, refer to DNS Operation in this manual.1.2.8 Displaying and Maintaining IPv6To do… Use the command… RemarksDisplay DNS domain namesuffix information display dns domain [ dynamic ]Display IPv6 dynamicdomain name cacheinformation.display dns ipv6 dynamic-hostDisplay DNS serverinformation display dns server [ dynamic ]Display the FIB entries display ipv6 fibDisplay the mappingbetween host name andIPv6 addressdisplay ipv6 hostDisplay the brief IPv6information of an interfacedisplay ipv6 interface [ interface-typeinterface-number | brief ]Display neighborinformationdisplay ipv6 neighbors [ ipv6-address |all | dynamic | interface interface-typeinterface-number | static | vlan vlan-id ][ | { begin | exclude | include }regular-expression ]Display the total number ofneighbor entries satisfyingthe specified conditionsdisplay ipv6 neighbors { all | dynamic |static | interface interface-typeinterface-number | vlan vlan-id } countDisplay information aboutthe routing table display ipv6 route-table [ verbose ]Display information relatedto a specified socketdisplay ipv6 socket [ socktypesocket-type ] [ task-id socket-id ]Availablein anyview