Operation Manual – PoE-PoE ProfileH3C S5600 Series Ethernet Switches Chapter 2 PoE Profile Configuration2-3z The display current-configuration command can be used to query which PoEprofile is applied to a port. However, the command cannot be used to query whichPoE features in a PoE profiles are applied successfully.2) PoE profile configuration is a global configuration, and applies synchronously inthe Intelligent Resilient Framework (IRF) system.3) Combination of Unit creates a new Fabric. In the newly created Fabric, the PoEprofile configuration of the Unit with the smallest Unit ID number will become thePoE profile configuration for the Fabric currently in use.4) Split of Fabric results in many new Fabrics. In each newly created Fabric, the PoEprofile configuration of each Unit remains the same as it was before the split.2.3 Displaying PoE Profile ConfigurationTo do… Use the command… RemarksDisplay the detailedinformation about the PoEprofiles created on theswitchdisplay poe-profile{ all-profile | interfaceinterface-typeinterface-number | nameprofile-name }Available in any view2.4 PoE Profile Configuration Example2.4.1 PoE Profile Application ExampleI. Network requirementsSwitch A is an S5600 series Ethernet switch supporting PoE.GigabitEthernet 1/0/1 through GigabitEthernet 1/0/10 of Switch A are used by users ofgroup A, who have the following requirements:z The PoE function can be enabled on all ports in use.z Signal mode is used to supply power.z The PoE priority for GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5 is Critical,whereas the PoE priority for GigabitEthernet 1/0/6 through GigabitEthernet 1/0/10is High.z The maximum power for GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5ports is 3000 mW, whereas the maximum power for GigabitEthernet 1/0/6 throughGigabitEthernet 1/0/10 is 15400 mW.Based on the above requirements, two PoE profiles are made for users of group A.z Apply PoE profile 1 for GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5;z Apply PoE profile 2 for GigabitEthernet 1/0/6 through GigabitEthernet 1/0/10.