Operation Manual – LoginH3C S5600 Series Ethernet Switches Chapter 2 Logging In Through the Console Port2-14To do… Use the command… RemarksConfigure to authenticateusers locally or remotelyauthentication-modescheme [ command-authorization ]RequiredThe specified AAA schemedetermines whether toauthenticate users locally orremotely.By default, users logging inthrough the console port(AUX user interface) are notauthenticated.Set thebaud rate speed speed-valueOptionalThe default baud rate of theAUX port (also the consoleport) is 9,600 bps.Set thecheck modeparity { even | none |odd }OptionalBy default, the check modeof a console port is set tonone, that is, no check bit.Set the stopbits stopbits { 1 | 1.5 | 2 }OptionalThe default stop bits of aconsole port is 1.ConfiguretheconsoleportSet the databits databits { 7 | 8 }OptionalThe default data bits of aconsole port is 8.Configure the commandlevel available to userslogging in to the userinterfaceuser privilege levellevelOptionalBy default, commands oflevel 3 are available to userslogging in to the AUX userinterface.Make terminal servicesavailable to the userinterfaceshellOptionalBy default, terminal servicesare available in all userinterfaces.Set the maximumnumber of lines thescreen can containscreen-lengthscreen-lengthOptionalBy default, the screen cancontain up to 24 lines.You can use thescreen-length 0 commandto disable the function todisplay information inpages.
