Operation Manual – DHCPH3C S5600 Series Ethernet Switches Chapter 2 DHCP Server Configuration2-142.4.9 Configuring BIMS Server Information for the DHCP ClientA DHCP client performs regular software update and backup using configuration filesobtained from a branch intelligent management system (BIMS) server. Therefore, theDHCP server needs to offer DHCP clients the BIMS server IP address, port number,shared key from the DHCP address pool.Follow these steps to configure BIMS server information for the DHCP client:To do… Use the command… RemarksEnter system view system-view —Enter DHCP address poolviewdhcp server ip-poolpool-name —Configure the BIMSserver information to beassigned to the DHCPclientbims-server ipip-address [ portport-number ] sharekeykeyRequiredBy default, no BIMSserver information isconfigured.2.4.10 Configuring Option 184 Parameters for the Client with Voice ServiceOption 184 is a reserved option, and the information it carries can be customized. Youcan define four sub-options for this option after enabling the DHCP server. Thus,besides obtaining an IP address, the DHCP client with voice services can obtain voicerelated parameters from the DHCP address pool.I. Basic conceptThe four sub-options of Option 184 mainly carry information about voice. The followinglists the sub-options and the carried information:z Sub-option 1: IP address of the network call processor (NCP-IP).z Sub-option 2: IP address of the alternate server (AS-IP).z Sub-option 3: Voice VLAN configuration.z Sub-option 4: Fail-over call routing.