Operation Manual – LoginH3C S5600 Series Ethernet Switches Chapter 2 Logging In Through the Console Port2-11To do… Use the command… RemarksSet the timeout time forthe user interfaceidle-timeout minutes[ seconds ]OptionalThe default timeout time of a userinterface is 10 minutes.With the timeout time being 10minutes, the connection to a userinterface is terminated if nooperation is performed in the userinterface within 10 minutes.You can use the idle-timeout 0command to disable the timeoutfunction.2.5.2 Configuration ExampleI. Network requirementsAssume the switch is configured to allow users to log in through Telnet, and the userlevel is set to the administrator level (level 3). Perform the following configurations forusers logging in through the console port (AUX user interface).z Authenticate the users using passwords.z Set the local password to 123456 (in plain text).z The commands of level 2 are available to the users.z The baud rate of the console port is 19,200 bps.z The screen can contain up to 30 lines.z The history command buffer can store up to 20 commands.z The timeout time of the AUX user interface is 6 minutes.II. Network diagram配置交换机的PC机运行TelnetEthernetGE1/0/1Figure 2-7 Network diagram for AUX user interface configuration (with theauthentication mode being password)
