Operation Manual – AAAH3C S5600 Series Ethernet Switches Chapter 2 AAA Configuration2-19Follow these steps to set the status of RADIUS servers:To do… Use the command… RemarksEnter system view system-view —Create a RADIUS schemeand enter its viewradius schemeradius-scheme-nameRequiredBy default, a RADIUSscheme named "system"has already been createdin the system.Set the status of theprimary RADIUSauthentication/authorization serverstate primaryauthentication { block |active }Set the status of theprimary RADIUSaccounting serverstate primaryaccounting { block |active }Set the status of thesecondary RADIUSauthentication/authorization serverstate secondaryauthentication { block |active }Set the status of thesecondary RADIUSaccounting serverstate secondaryaccounting { block |active }OptionalBy default, the RADIUSservers specified with IPaddresses in the RADIUSscheme are all in theactive state.2.2.8 Configuring the Attributes of Data to be Sent to RADIUS ServersFollow these steps to configure the attributes of data to be sent to RADIUS servers:To do… Use the command… RemarksEnter system view system-view —Create a RADIUS schemeand enter its viewradius schemeradius-scheme-nameRequiredBy default, a RADIUSscheme named "system"has already been createdin the system.Set the format of theusernames to be sent toRADIUS serveruser-name-format{ with-domain |without-domain }OptionalBy default, the usernamessent from the switch toRADIUS server carry ISPdomain names.
