Operation Manual – QoS-QoS ProfileH3C S5600 Series Ethernet Switches Chapter 1 QoS Configuration1-41.2 QoS Supported by the S5600 Series Ethernet SwitchesThe S5600 series Ethernet switches support the QoS features listed in Table 1-1:Table 1-1 QoS features supported by the S5600 series Ethernet switchesQoS Feature Description Refer to …TrafficclassificationClassify incoming traffic based onACLs. The S5600 series supportthe following types of ACLs:z Basic ACLsz Advanced ACLsz Layer-2 ACLsz User-defined ACLsz For information aboutACLs, refer to theACL Operation andACL Commandmanuals.z For information abouttraffic classification,refer to TrafficClassification.The S5600 series supportperforming the following QoSactions for packets matching thespecified ACL:z Priority markingz Traffic policingz Traffic redirectingz VLAN Mappingz Traffic accountingz Traffic mirroringz For information aboutpriority marking, referto Priority Marking.z For information abouttraffic policing, referto Traffic Policing.z For information abouttraffic redirecting,refer to TrafficRedirecting.z For information aboutVLAN Mapping, referto VLAN Mapping.z For information abouttraffic accounting,refer to Flow-BasedTraffic Accounting.z For information abouttraffic mirroring, referto Traffic mirroring.QoS actionYou can configure the followingQoS actions as required on theS5600 series:z Priority trust modez Protocol packet priorityz Line ratez Burstz For information aboutpriority trust mode,refer to Priority TrustMode.z For information aboutspecifying priority forprotocol packets,refer to ProtocolPriority.z For information aboutline rate, refer to LineRate.z For information aboutthe burst function,refer to Burst.
