Operation Manual – GVRPH3C S5600 Series Ethernet Switches Chapter 1 GVRP Configuration1-8To do ... Use the command ... RemarksEnter Ethernet port view interface interface-typeinterface-number —Configure GVRP portregistration modegvrp registration { fixed |forbidden | normal }OptionalBy default, GVRP portregistration mode isnormal.1.3 Displaying and Maintaining GVRPTo do … Use the command … RemarksDisplay GARP statistics display garp statistics[ interface interface-list ]Display the settings of theGARP timersdisplay garp timer[ interface interface-list ]Display GVRP statistics display gvrp statistics[ interface interface-list ]Display the global GVRPstatus display gvrp statusClear GARP statistics reset garp statistics[ interface interface-list ]Available in any view1.4 GVRP Configuration Example1.4.1 GVRP Configuration ExampleI. Network requirementsz Enable GVRP on all the switches in the network so that the VLAN configurationson Switch C and Switch E can be applied to all switches in the network, thusimplementing dynamic VLAN information registration and refresh.z By configuring the GVRP registration modes of specific Ethernet ports, you canenable the corresponding VLANs in the switched network to communicate witheach other.
