Operation Manual – System Maintenance and DebuggingH3C S5600 Series Ethernet Switches Chapter 4 Device Management4-1Chapter 4 Device ManagementWhen configuring device management, go to these sections for information you areinterested in:z Introduction to Device Managementz Device Management Configurationz Displaying the Device Management Configurationz Remote Switch APP Upgrade Configuration Example4.1 Introduction to Device ManagementDevice Management includes the following:z Reboot the Ethernet switchz Configure real-time monitoring of the running status of the systemz Specify the APP to be used at the next rebootz Update the Boot ROMz Update the host software of the switches in the Fabricz Load Hot Patchz Identifying and Diagnosing Pluggable Transceivers4.2 Device Management Configuration4.2.1 Device Management Configuration Task listComplete the following tasks to configure device management:Task RemarksRebooting the Ethernet Switch OptionalScheduling a Reboot on the Switch OptionalConfiguring Real-time Monitoring of the Running Statusof the System OptionalSpecifying the APP to be Used at Reboot OptionalUpgrading the Boot ROM OptionalUpgrading the Host Software in the Fabric OptionalLoading Hot Patch OptionalIdentifying and Diagnosing Pluggable Transceivers Optional
