Operation Manual – Link AggregationH3C S5600 Series Ethernet Switches Chapter 1 Link Aggregation Configuration1-111.5 Displaying and Maintaining Link AggregationConfigurationTo do… Use the command… RemarksDisplay summary informationof all aggregation groupsdisplay link-aggregationsummaryDisplay detailed information ofa specific aggregation groupor all aggregation groupsdisplay link-aggregationverbose [ agg-id ]Display link aggregationdetails of a specified port orport rangedisplay link-aggregationinterface interface-typeinterface-number [ tointerface-type interface-number ]Display local device ID display lacp system-idAvailable inany viewClear LACP statistics about aspecified port or port rangereset lacp statistics [ interfaceinterface-type interface-number[ to interface-typeinterface-number ] ]Available inuser view1.6 Link Aggregation Configuration Example1.6.1 Ethernet Port Aggregation Configuration ExampleI. Network requirementsz Switch A connects to Switch B with three ports GigabitEthernet 1/0/1 toGigabitEthernet 1/0/3. It is required that load between the two switches can beshared among the three ports.z Adopt three different aggregation modes to implement link aggregation on thethree ports between switch A and B.II. Network diagramFigure 1-1 Network diagram for link aggregation configuration