5-38Starting units and components012345678910AA 704 remote controlB 703 remote control3. Connect the engine start switch coupler.Starting units and componentsChecking the starter relay1. Remove the junction box cover.2. Measure the input voltage between thestarter relay terminal a and ground.3. Disconnect the starter relay lead, andthen remove the starter relay.NOTICE: Always disconnect the neg-ative battery terminal before discon-necting the starter relay terminals.4. Connect the positive battery lead to therelay connector b, and the negative bat-tery lead to the relay lead c, and thencheck for continuity between terminals aand d. Replace the starter relay if out ofspecification.SwitchpositionTerminala bClip removedClip installedaB bbaA OFF STARTONTerminal a–Ground:12.0 V (battery voltage)abdcaBBrIgnition units and components / Starting units and components