Yamaha F150B Service Manual
Also see for F150B: Owner's manualService manualOwner's manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                          | |
Contents
|
9-33BRKT Bracket unitRemoving the PTT unit• After tilting up the swivel bracket, makesure to support it with the tilt stop lever.Otherwise, the swivel bracket could sud-denly lower if the PTT unit should losefluid pressure.• When removing the PTT unit with thepower unit installed, make sure to sus-pend the outboard motor. If the outboardmotor is not suspended it can fall sud-denly and result in severe injury.1. Fully tilt the swivel bracket up, and thensupport it with the tilt stop lever a.TIP:If the PTT unit does not operate, open themanual valve b by turning it counterclock-wise, and then tilt the swivel bracket up man-ually.2. Remove the plastic ties c, and then pullout the PTT motor lead a from the clampbracket (PORT).3. Disconnect the ground lead d.4. Remove the circlip e, and the shaft f.5. Connect the PTT motor leads a to thebattery terminals to retract the PTT ramsfully.6. Remove the shaft g, and then removethe PTT unit h.abRam PTT motor lead BatteryterminalDown Black (B)Black/White (B/W)ccacefdB/WBa+– |
Related manuals for Yamaha F150B
manualsdatabase
Your AI-powered manual search engine