7-49Power unitPOWRAssembling the oil pump assembly1. Install a new oil seal into the oil pumpcover.2. Apply grease to new oil seals, and theninstall them into the oil pump housing.3. Install a new oil seal into the oil pumphousing.4. Install a new oil seal f and the gasketg, and then tighten the screws h to thespecified torque.Installing the oil pump assemblyWhen installing the oil pump assembly,make sure to prevent the oil seal damage.Needle bearing attachment a:90890-06654Driver rod L3 b:90890-06652Needle bearing attachment c:90890-06611Driver rod L3 d:90890-06652abdceaGeneral pipe e:a = 45.0 mm (1.77 in)Screw h:4 N·m (0.4 kgf·m, 3.0 ft·lb)fgh
