9-55BRKT Bracket unit2. Install a new seal d, new dust seal e,and new O-ring f to the trim cylinderend screw g.3. Install the trim cylinder end screws g.Installing the trim ram1. Hold the PTT body a.2. Add the recommended fluid through thePTT body hole a.3. Install a new O-ring b and the backupring c to the free piston d.4. Push the free piston d into the tiltcylinder until it bottoms out.5. Fill the PTT body with the recommendedfluid to the correct level b through holesc, d, and e.6. Install the trim ram assemblies into thePTT body, and then tighten the trimcylinder end screws e to the specifiedtorque.Recommended PTT fluid: ATF Dexron ΙΙFluid quantity (reference quantity):30 cm 3 (1.0 US oz, 1.1 Imp oz)eddggff eaaRecommended PTT fluid: ATF Dexron ΙΙTrim and tilt wrench f: 90890-06587bbccddbc deef