8-55LOWR Lower unitRemoving the propeller shafthousing assembly1. Fold one tooth of the claw washer that isbent toward the propeller.2. Loosen the ring nut.3. Remove the ring nut c and claw washerd.4. Remove the propeller shaft housingassembly, and shim(s) (T2).TIP:Be careful not to lose the key g.Disassembling the propeller shafthousing assembly1. Remove the spring a, and then removethe cross pin b, shift rod joint c, dogclutch d, balls e, f, g, spring h, andshift slider i.Ring nut wrench 4 a: 90890-06512Ring nut wrench extension b:90890-06513abdcSlide hammer e: 90890-06531Puller head f: 90890-06514efgabdehc igg ff
