Yamaha F150B Service Manual
Also see for F150B: Owner's manualService manualOwner's manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                          | |
Contents
|
3-8Mounting the rigging grommet012345678910ATIP:The second hole from the clamp bracket topis recommended for the upper mounting bolt.6. Secure the bolts, and firmly tighten thenut to the extent that the clamp bracketdoes not bite into the boat transom.7. Firmly tighten the locknuts.Mounting the rigging grommetRigging grommet descriptiona Main wiring harnessb Water temperature lead (option)c Water pressure hose (option)d Isolator lead (option)e Battery cablef Gauge harnessg Fuel hoseh Speedometer hosei Shift cablej Throttle cableInstalling the shift cableAlways perform the cable adjustment inadvance, following the procedures in theremote control operation manual.1. Remove the rubber seal a at the retain-ing plate b portion.Boat transomthickness (D) Mounting bolt55–65 mm(2.17–2.56 in)M12 × 115 mm(4.53 in)65–75 mm(2.56–2.95 in)M12 × 130 mm(5.12 in)75–95 mm(2.95–3.74 in)M12 × 150 mm(5.91 in)fc d decdde fDfc d dea bcdefghija bOutboard motor mount / Mounting the rigging grommet |
Related manuals for Yamaha F150B
manualsdatabase
Your AI-powered manual search engine