9-14Upper case and mounts012345678910ARemoving the upper case1. Drain the remained engine oil. See “Dis-assembling the upper case” (9-17) step1.2. Disconnect the ground lead a andadapter b.3. Loosen the upper mount bracket bolts cand lower mount cover bolts (PORT andSTBD) d.4. Remove the upper mounting nuts e andlower mounting nuts f, and then removethe upper case assembly.Installing the upper case1. Install the upper mounts a and bolts b.2. Install the upper mount bracket c, andthen tighten the upper mount bracketbolts d temporarily.3. Install the lower mounts e and bolts f.4. Install the lower mount covers g, andthen tighten the lower mount cover boltsh temporarily.abdcbaefa baabcdeeffgh