Yamaha F150B Service Manual

Also see for F150B: Owner's manual Service manual Owner's manual

6-22Throttle body012345678910AInstalling the throttle body assembly1. Install the throttle link joint assembly a.2. Install the throttle body assembly b, andthen tighten the throttle body assemblybolts c to the specified torque.3. Install the brackets d and temporarilytighten the bracket bolts e and f.4. Tighten the bracket bolts e and f.Adjusting the TPS (whendisassembling or replacing thethrottle body)When adjusting the TPS, the output voltagecan also be measured using the “Enginemonitor” of the YDIS. To connect and operatethe YDIS, see the YDIS (Ver. 1.30 or later)Instruction Manual.1. Install the throttle body assembly.2. Install the throttle link. See “Installing thethrottle link” (6-18).3. Loosen the synchronizing screw a toopen throttle valves #3 and #4.4. Loosen the throttle stop screw b to fullyclose throttle valves #1 and #2.5. Disconnect the TPS coupler a, and thenconnect the test harness (3 pins) c.6. Turn the engine start switch to “ON.”Throttle body assembly bolt c:13 N·m (1.3 kgf·m, 9.6 ft·lb)abccddffeeab