Yamaha F150B Service Manual

Also see for F150B: Owner's manual Service manual Owner's manual

9-41BRKT Bracket unitRemoving the reservoir• Make sure that the PTT rams are fullyextended when removing the reservoir,otherwise fluid can spurt out from theunit due to internal pressure.• Do not push the PTT rams down whilethe reservoir is removed from the PTTunit, otherwise fluid can spurt out.1. Remove the reservoir a and O-ring b.TIP:Place a container under the PTT unit to catchthe fluid.Removing the PTT motor1. Remove the PTT motor assembly a, O-ring b, gear pump filter c, and joint d.Disassembling the PTT motor1. Remove the screw a, and then slide thelead holder a and rubber seals b awayfrom the stator b.2. Remove the PTT motor screws c, andthen remove the stator b.NOTICE: Hold the end of the armatureshaft with a pair of pliers, and thenremove the armature together with themotor base assembly, otherwise thearmature could separate from themotor base assembly due to themagnetic force of the stator b anddamage the brushes.3. Remove the armature d.4. Disconnect the PTT motor lead (B/W:Black/White) c.5. Disconnect the PTT motor lead (B:Black) d, and then remove the brushese and f. NOTICE: Do not touch thebimetal e, otherwise the operation ofthe circuit breaker can be affected.ababcdcd acbbabB/W c