Zeiss Lightsheet Z.1 Operating Manual

Contents

CHAPTER 4 - SYSTEM OPERATIONLightsheet Z.1 Center Screen Area / Image Containers - Display and Image Analysis Carl Zeiss02/2013 000000-1790-528 1834.1.2 Container Configuration with theContainer Context MenuClicking on the background of the control area on top ofthe image container (Fig. 284) with the right-mousebutton opens a context menu for:− setting the view for the Image tabs (see above),− choosing to split the Center Screen Area into 1, 2,or 3 containers and setting the automaticcontainer layout− choosing between separate or shared view controlsbetween the containers.The same menu is available within the menu bar in theView part of the menu.Splitting the Center Screen Area into several containershas the advantage that side-by-side comparison of imagedata becomes very easy.The disadvantage is that the individual container necessarily becomes smaller. Up to 3 containers can bechosen. The "Automatically layout container" option is switched on by default and fixes the containerwidth in layouts with multiple containers. In two-monitor setups it also fixes the right edge of the firstcontainer to the monitor edge.If Separate view Controls are chosen, each container has its own set of View Options control blocks. Ifa Shared view Controls is chosen, the set of View Options control tabs spans the whole area under thecontainers. The tools and functions always apply to the currently active container / image.Fig. 284 Container Context menu