Zeiss Lightsheet Z.1 Operating Manual

Contents

CHAPTER 4 - SYSTEM OPERATIONLightsheet Z.1 Center Screen Area / Image Containers - Display and Image Analysis Carl Zeiss02/2013 000000-1790-528 2194.8.11 SettingsFlying modeTicking the tick box Flying mode activates themode, unticking deactivates it.To show or hide an overview image, tick the Showoverlay image box.The fly-speed can be adjusted in a range from 1to 100.Split ModeTicking this tick box activates a channel wise 3Dsplit view of the data. This is available in surfacerender mode only. An overview image with allchannels combined can be shown optionally byticking Draw combined image.StereoTwo Stereo views can be chosen from this sub-menu:Anaglyph is a view in which the data can beexamined in 3D using red/green glasses. The imageis built up twice (once each for the red and greencolors), resulting in a stereoscopic image.The stereoscopic effect can only be seen with the aid of red/green 3D goggles. The red lens is to be usedfor the right eye and the green lens for the left eye.Camera offset: Defines the distance of both cameras from each other (units in meters).Parallax shift: Determines the degree of shift which is necessary to correlate both camera views. Theslider should be adjusted to maximize the stereo effect. Please note, that this setting will be different foreach observer.Fig. 330 3D Renderer Settings – Flying modeFig. 331 3D Renderer Settings – Split modeFig. 332 3D Renderer Settings – Stereo