CHAPTER 1 - HARDWARELightsheet Z.1 User Interfaces Carl Zeiss02/2013 000000-1790-528 33Capillary size(inner diameter)CapillaryColor coding/Reference numberPlungerReference numberTeflon tip Teflon tip tooColor codingSize 1 (~0.68 mm) Red/701902 #701996 - -Size 2 (~1mm) Black/701904 #701997 Size 2 ClearSize 3 (~1.5mm) Green/701908 #701998 Size 3 GreenSize 4 (~2.15mm) Blue/701910 #701999 Size 4 BlueTab. 1 Capillary components in the Chamber & Sample Holder Starter Kit Lightsheet Z.13. The sleeves are tube-shaped with four slits at one end. Insert the sleeves into the capillary sampleholder stem (Fig. 26/2) so that the two slit endings point outwards and the non-slit endings facetoward the center.4. Take the clamp screw (Fig. 26/4) and position it onto the capillary sample stem holder turningclockwise three times (360° each turn).1 Sample holder disc for capillaries 5 Plunger2 Capillary sample holder stem 6 Capillary with color-coded marking3 Sleeves (color-coded) 7 Ejection tool4 Clamp screwFig. 26 Assembly of the sample holder for capillary
