CHAPTER 1 - HARDWARELightsheet Z.1 User Interfaces Carl Zeiss02/2013 000000-1790-528 413.7.3 Heating Device Humidity S1For a better humidification of incubation atmosphere the Humidifier of the corresponding CO2 -ModuleLightsheet Z.1 can be inserted into the Heating Device Humidity S1. The Heating Device Humidity S1enables to improve thermal equilibrium in the sample chamber and avoid condensation in the tubing.3.7.4 Registration of the incubation modules• After the Lightsheet Z.1 and the PC for system control are turned on and the operation system hasbooted start the software ZEN Configuration Tool. You find it either as a shortcut on your desktop orin this directory : C:\ZEN\HWT as Configuration Tool 2012.exe.• On the opening window press the Start configuring button (Fig. 33):• On the Configuration tab (Fig. 34) you find an Incubation Components field with check boxes forCO 2 Module and TempModule that you can activate or deactivate depending on your incubationconfiguration. These modules will show up later as Atmosphere (%) panel and Temperature ( oC)panel respectively in the ZEN software (see CHAPTER 4 SYSTEM OPERATION).Fig. 33 ZEN Configuration Tool Start-up window
