1004 GMRP CommandsNOTE: The Group Service capability is not supported.The registration and deregistration of membership results in the multicasttable being updated with a new entry or the existing entry modified.This ensures that the networking device receives multicast frames from allports but forwards them through only those ports for which GMRP hascreated Group registration entry (for that multicast address). Registrationentries created by GMRP ensures that frames are not transmitted on LANsegments which neither have registered GMRP participants nor are in thepath through the active topology between the sources of the frames and theregistered group members.Commands in this ChapterThis chapter explains the following commands:gmrp enableUse the gmrp enable command in Global Configuration mode to enableGMRP globally or Interface Configuration mode to enable GMRP on a port.Syntaxgmrp enableno gmrp enableDefault ConfigurationGMRP is disabled by default.Command ModeGlobal Configuration and Interface Configuration modesUser GuidelinesIGMP snooping is incompatible with GMRP and must be disabled on anyVLANs running GMRP.gmrp enable show gmrp configuration
