1390 Auto-Install Commandsboot host autorebootUse the boot host autoreboot command in Global Configuration mode toenable rebooting the device (no administrative intervention) when the auto-image is successfully downloaded. Use the no form of this command todisable rebooting the device (no administrative intervention) when the auto-image is successfully downloaded.Syntaxboot host autorebootno boot host autorebootDefault ConfigurationThe default value is enabled.Command ModeGlobal Configuration modeUser GuidelinesThe configuration on the master switch controls the stack as if it is a singleswitch. No configuration steps need to be taken on the member switches toenable rebooting the member switches after auto-image download.Exampleconsole#console#configureconsole(config)#boot host autorebootconsole(config)#no boot host autorebootboot host autosaveUse the boot host autosave command in Global Configuration mode toenable automatically saving the downloaded configuration on the switch. Usethe no form of this command to disable automatically saving the downloadedconfiguration on the switch.
