Password Management Commands 1509ExampleThe following example configures user bob with password xxxyymmmm anduser level 15.(config)# username bob password xxxyyymmm level 15passwords strength-checkUse the passwords strength-check command in Global Configuration modeto enable the Password Strength feature. The command is used to enable thechecking of password strength during user configuration. Use the no form ofthe command to disable the Password Strength feature.Syntaxpasswords strength-checkno passwords strength-checkDefault ConfigurationThe password strength feature is disabled by default.Command ModeGlobal ConfigurationUser GuidelinesThis command enables/disables enforcement of password strength checkingpolicy as configured by the following commands:passwords strength minimum uppercase-letterspasswords strength minimum lowercase-letterspasswords strength minimum special-characterspasswords strength minimum numeric-characterspasswords strength max-limit consecutive-characterspasswords strength max-limit repeated-characterspasswords strength minimum character-classes
