1382 Virtual Router Redundancy Protocol CommandsAuthentication Failure......................... 0IP TTL Errors.................................. 0Zero Priority Packets Received................. 0Zero Priority Packets Sent..................... 0Invalid Type Packets Received.................. 0Address List Errors ........................... 0Invalid Authentication Type.................... 0Authentication Type Mismatch................... 0Packet Length Errors........................... 0Pingable VRRP Commandsip vrrp accept-modeUse the ip vrrp accept-mode command in Interface (VLAN) Configurationmode to enable the VRRP Master to accept ping packets sent to one of thevirtual router’s IP addresses. Use the no form of the command to disableresponding to ping packets.Syntaxip vrrpvrid accept-modeno vrrpvrid accept-mode• vrid — Virtual router identification. (Range: 1-255)Default ConfigurationThe default configuration is disabled.Command ModeInterface Configuration (VLAN) mode.User GuidelinesThis command has no user guidelines.show ip vrrp interfaceUse the show ip vrrp interface command in User EXEC or Privileged EXECmode to display the configured value for Accept Mode.
