System Management Commands 1693Are you sure you want to reload the stack? (y/n)service unsupported-transceiverUse this command to avoid the following on using an unsupported optic.• Logging of a message.• Generation of SNMP trap.Use the no form of this command to set the transceiver support to the factorydefault.Syntaxservice unsupported-transceiverno service unsupported-transceiverDefault ConfigurationThe default configuration is to log a message along with the SNMP trapgeneration on insertion or removal of an optic that is not qualified by Dell.Command ModeGlobal Configuration modeUser GuidelinesThe switch logs a message and generates a trap on inserting or removing anoptics not qualified by Dell. This command suppresses the above mentionedbehavior.ExampleThe following example bypasses logging of a message and trap generation oninserting or removing an optics not qualified by Dell.console(config)# service unsupported-transceiverset descriptionUse the set description command in Stack Global Configuration mode toassociate a text description with a switch in the stack.
