Multicast Commands 1161ModeSparseHello Interval (secs)30Join Prune Interval (secs)60DR Priority1BSR BorderDisabledNeighbor Count1Designated Router192.168.10.1If none of the interfaces are enabled for PIM, the following message isdisplayed:None of the routing interfaces are enabled for PIMshow ip pim neighborUse the show ip pim neighbor command in User EXEC or Privileged EXECmodes to display PIM neighbors discovered by PIMv2 Hello messages. If theinterface number is not specified, this command displays the neighborsdiscovered on all the PIM-enabled interfaces.Syntaxshow ip pim neighbor [vlanvlan-id]•vlan-id — A valid VLAN ID for which multicast routing has been enabled.Default ConfigurationThis command has no default configuration.Command ModeUser EXEC, Privileged EXEC modes, Configuration mode and allConfiguration submodesUser GuidelinesThe following information is displayed.Field DescriptionNeighbor Addr IP address of the PIM neighborInterface Interface numberUptime Time since the neighbor is learned
