486 IP Addressing CommandsUser GuidelinesThis command has no user guidelines.ExampleThe following example defines a static host name-to-address mapping in thehost cache.console(config)#ip host accounting.dell.com 176.10.23.1ip name-serverUse the ip name-server command in Global Configuration mode to defineavailable IPv4 or IPv6 name servers. To delete a name server, use the no formof this command.Syntaxip name-serverserver-address1 [server-address2 … server-address8]no ip name-server [server-address1 … server-address8]•server-address— Valid IPv4 or IPv6 addresses of the name server. (Range:1–255 characters)Default ConfigurationNo name server IP addresses are specified.Command ModeGlobal Configuration modeUser GuidelinesServer preference is determined by entry order.Up to eight servers can be defined in one command or by using multiplecommands. Use the show hosts command on page 492 to display theconfigured name servers.ExampleThe following example sets the available name server.console(config)#ip name-server 176.16.1.18
