602 Port Channel CommandsPo2No Configured PortsStatic31Hash Algorithm Type1 - Source MAC, VLAN, Ethertype, source module and port ID2 - Destination MAC, VLAN, Ethertype, source module and port ID3 - Source IP and source TCP/UDP port4 - Destination IP and destination TCP/UDP port5 - Source/Destination MAC, VLAN, Ethertype, source MODID/port6 - Source/Destination IP and source/destination TCP/UDP port7 - Enhanced hashing modeExample #2console#show interfaces port-channel 1Channel Ports Ch-Type Hash Type Min-links Local Prf------- ----------------------------- -------- ---------- --------- ---------Po1 Inactive: Gi1/0/1, Gi1/0/2, Dynamic 3 1 EnabledGi1/0/3, Gi1/0/4show lacpUse this command in Privileged EXEC mode to display LACP informationfor Ethernet ports.Syntaxshow lacp {gigabitethernet unit/slot/port| tengigabitethernet unit/slot/port|fortygigabitethernet unit/slot/port [{parameters | statistics}]Default ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesThis command has no user guidelines.
