1612 SNMP Commands•filtername — Specifies the name of the filter. (Range: 1-30)Default ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesPer RFC 2573, an implicit exclude all filter is present at the beginning ofevery filter list. This implicit filter is not shown in the output of thiscommand.ExampleThe following examples display the configuration of filters with and without afilter name specification.console # show snmp filtersName OID Tree Type------------------- ---------------------------------user-filter1 1.3.6.1.2.1.1 Includeduser-filter1 1.3.6.1.2.1.1.7 Excludeduser-filter2 1.3.6.1.2.1.2.2.1.*.1 Includedconsole # show snmp filters user-filter1Name OID Tree Type------------------- ---------------------------------user-filter1 1.3.6.1.2.1.1 Includeduser-filter1 1.3.6.1.2.1.1.7 Excludedshow snmp groupUse the show snmp group command in Privileged EXEC mode to display theconfiguration of groups.Syntaxshow snmp group [groupname]
