IPv6 Routing Commands 1127OSPF Routes.................................. 0Intra Area Routes............................ 0Inter Area Routes............................ 0External Type-1 Routes....................... 0External Type-2 Routes....................... 0Total routes................................. 0Number of Prefixes:show ipv6 trafficUse the show ipv6 traffic command in User EXEC mode to show traffic andstatistics for IPv6 and ICMPv6.Syntaxshow ipv6 traffic [vlanvlan-id | tunneltunnel-id | loopbackloopback-id]•vlan-id — Valid VLAN ID, shows information about traffic on a specificinterface or, without the optional parameter, shows information abouttraffic on all interfaces.• tunnel — Tunnel identifier. (Range: 0-7)• loopback — Loopback identifier. (Range: 0-7)Default ConfigurationThis command has no default configuration.Command ModeUser EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesThis command has no user guidelines.ExamplesThe following examples show traffic and statistics for IPv6 and ICMPv6, firstfor all interfaces and an individual VLAN.console> show ipv6 trafficIPv6 STATISTICSTotal Datagrams Received........................................... 0Received Datagrams LocallyDelivered.......................................... 0
