336 DHCP Snooping Commandsrange of 0-300 packets per second and the burst interval in the range of 1-15seconds. In general, a rate limit of under 100 pps is valid for untrustedinterfaces.Examplesconsole(config-if-Gi1/0/1)#ip dhcp snooping limit noneconsole(config-if-Gi1/0/1)#ip dhcp snooping limit rate 100 burst interval 1ip dhcp snooping log-invalidUse the ip dhcp snooping log-invalid command to enable logging of DHCPmessages filtered by the DHCP Snooping application. Use the no form of thiscommand to disable logging.Syntaxip dhcp snooping log-invalidno ip dhcp snooping log-invalidDefault ConfigurationLogging of filtered messages is disabled by default.Invalid DHCP messages are not logged by default.Command ModeInterface Configuration (gigabitethernet, port-channel, tengigabitethernet,fortygigabitethernet) modeUser GuidelinesThere are no user guidelines for this command.Exampleconsole(config-if-Gi1/0/1)#ip dhcp snooping log-invalidconsole(config-if-Gi1/0/1)#no ip dhcp snooping log-invalid
