Command Groups 156Utility CommandsAuto-InstallCaptive PortalCommand Description Mode aa. For the meaning of each Mode abbreviation, see Mode Types on page 87.boot auto-copy-sw Enables or disables Stack FirmwareSynchronization.GCboot auto-copy-sw allow-downgradeEnables downgrading the firmware version onthe stack member if the firmware version on themanager is older than the firmware version onthe member.GCboot host autoreboot Enables rebooting the device (no administrativeintervention) when the auto-image issuccessfully downloaded.GCboot host autosave Enables/disables automatically saving thedownloaded configuration on the switch.GCboot host dhcp Enables/disables Auto Config on the switch. GCboot host retrycount Set the number of attempts to download aconfiguration.GCshow auto-copy-sw Displays Stack Firmware Synchronizationconfiguration status.PEshow boot Displays the current status of the Auto Configprocess.PECommand Description Mode aauthentication timeout Configures the authentication timeout. CPcaptive-portal Enables the captive portal configuration mode. GCenable Globally enables captive portal. CPIhttp port Configures an additional HTTP port for captiveportal to monitor.CP
