1498 Management ACL CommandsUser GuidelinesThis command has no user guidelines.ExampleThe following example configures an access-list calledmlist as themanagement access-list.console(config)# management access-class mlistmanagement access-listUse the management access-list command in Global Configuration mode todefine an access list for management, and enter the access-list forconfiguration. Once in the access-list configuration mode, the denied orpermitted access conditions are configured with the deny and permitcommands. To remove an access list, use the no form of this command.Syntaxmanagement access-listnameno management access-listname•name — The access list name. (Range: 1–32 printable characters)Default ConfigurationThis command has no default configuration.Command ModeGlobal Configuration modeUser GuidelinesThis command enters the access-list configuration mode, where the denied orpermitted access conditions with the deny and permit commands must bedefined.If no match criteria are defined the default is deny.If reentering to an access-list context, the new rules are entered at the end ofthe access-list.
